AJAX ReX User Manual page 4

Connection of ReX to the hub
Prior to initiating the connection:
1. Install the Ajax application
the hub guide.
2. Create user account, add the hub to the application, and create at least one
room.
3. Open the Ajax application.
4. Turn on the hub and check the Internet connection.
5. Ensure that the hub is disarmed and is not updating by checking its status in
the mobile application.
6. Connect ReX to external power.
Only users with administrator rights can add a device to the hub.
Connecting ReX to the hub:
1. Click Add Device in the Ajax application.
2. Name the extender, scan or manually enter the QR-code (located on the lid and
package), and select the room where the device is located.
onto your smartphone following the instructions of