AJAX ReX User Manual page 11

1. Fix the SmartBracket attachment panel with the bundled screws. If you choose
to use other fasteners, make sure that they do not damage or deform the
panel.
It is not recommended to use double-sided adhesive tape for installation. This can
result in ReX falling that can lead to malfunctioning of the device.
2. Slide ReX onto the attachment panel. After installation, check the tamper
status in the Ajax application and then the panel tightness.
3. In order to ensure higher reliability, �x ReX to the SmartBracket panel with the
bundled screws.
Do not �ip the range extender when attaching vertically (for instance, on a wall).
When properly �xed, the Ajax logo can be read horizontally.
You will receive a noti�cation if an attempt to detach the extender from the surface
or remove it from the attachment panel is detected.
It is strictly forbidden to disassemble the device connected to the power supply! Do not use
the device with a damaged power cable. Do not disassemble or modify ReX or its individual
parts — this may interfere with the normal operation of the device or lead to its failure.