Using Monitor Mode - Welch Allyn SureTemp 4 Directions For Use Manual

4. When the final tempera-
ture is reached, a tone
will sound and the tem-
perature will be dis-
played. Rectal tempera-
ture measurements will
take about 15 seconds.
5. After the temperature
measurement is complete, remove the probe from the
patient, then eject the probe cover by firmly pressing the
ejection button on the probe. (Figure 1).
6. Insert the probe into the storage channel to clear the
display, in preparation for another temperature.
NOTE: When using the Monitor mode, allow the tempera-
ture readout to stabilize for 3 minutes.

USING MONITOR MODE

Remove the probe from the storage channel and depress the
Mode button for more than 2 seconds. The "M" icon will appear
on the LCD indicating the unit is in Monitor mode. Load a
disposable probe cover onto probe and the unit is ready to
continuously display temperatures in Monitor mode. After the
Monitor mode temperature has been taken, replacing the
probe in the storage channel clears the display and resets the
thermometer to Normal mode.
16