16104 Backsaver Auger Specifications
specifications
Tubing
Flighting
Flighting shaft
Undercarriage
Lift arms
Bridging
Wheel and hubs
Hopper dimensions
Clearance in down position
Below spout to ground @ maximum lift
Below spout to ground in down position
Reach - edge of wheels to center of spout down position
Reach - edge of wheels to center of spout ½ up position (44' 3" spt-grd)
Reach - edge of wheels to center of spout up position
Tube angle, up position
Tube angle, down position
Wheel track center to center
Wheel track outside of wheels
Hitch weight in down position
Overall weight
Tractor requirements
Minimum PTO horsepower (w/1000 RPM PTO)
Approximate hydraulic requirements for lift
Y16104
Tubes #1 and #2: 10 gauge
Tubes #3, #4, #5: 11 gauge
¼" on swing and main auger
3" diameter, ³⁄16" wall
5" x 5" x ¼" square tube
¼" formed tubing
Upper bridging (cable) ¾"
Side bridging (cable) ½"
8 bolt hubs, 16.5 L x 16.1 x 10 ply
48" x 60" x 13 ½" tall
14' 10"
77' 4"
12' 5"
57' 8"
52'
36' 1"
44°
5°
13' ½"
14' 5 ½"
2,700 lbs
13,000 lbs
175 HP
1500 PSI
Need help?
Do you have a question about the Backsaver Auger 16104 and is the answer not in the manual?
Questions and answers