9. Installation & Commissioning
9.1
Unit site location
•
In order to achieve maximum cooling capacity, the installation location for the condensing unit should be
carefully selected.
•
Install the condensing unit in such a way so that hot air ejected by the condensing unit cannot be drawn in
again (short circuit of hot discharge air). Allow sufficient space for maintenance around the unit.
X
•
Ensure that there is no obstruction to air flow into or out of the unit. Remove obstacles which block air intake
or discharge.
X
•
The location must be well ventilated, so the unit can draw in and distribute plenty of air thus lowering the
condensing temperature.
•
To optimize the unit running conditions, the condenser coil must be cleaned at regular intervals.
•
The unit must be level in all directions.
T-CU01-NOV17-1
✓
✓
20