ICG IC4 Manual page 11

HOW TO ASSEMBLE THE
INDOOR CYCLE
15 MM PEDAL
WRENCH
11.
55 NM
R
12.
TEST FUNCTION OF HANDLEBAR AND SEAT HEIGHT ADJUSTMENT, HORIZONTAL SLIDERS AND EMERGENCY BRAKE.
HAND TIGHT
L
WARNING!
Attach the pedal marked R on the right
crank and tighten by turning clockwise (standard
right-hand thread). Attach the pedal marked L on the
left crank and tighten by turning counter-clockwise
(left-hand thread). Please make sure that both pedals
are fastened with suffi cient force (55 NM), to ensure that
the bolt does not become loose during use.
The threads are provided with TufLok® at the factory
to prevent them from becoming loose during use.
If bolts are loosened after initial assembly, we
recommend using medium-strength LOCTITE® 243
when reassembling.
Test the function of the adjustable
handlebar and seat.
Turn the resistance dial left and right
multiple times
Move the handlebars and seat up and
down and the back and forth. Test the
function of the thumb levers on the sliders
and the function of the pop pin knobs.
2
PEOPLE
SCREWDRIVER
PHILLIPS
11