Download Print this page
ICG IC2 Preventive Maintenance
Hide thumbs Also See for IC2:

Advertisement

Quick Links

IC3 & IC2
Preventive Maintenance
BNelson 1.2016
BNelson 1.2016
BNelson 10.2015

Advertisement

loading

Summary of Contents for ICG IC2

  • Page 1 IC3 & IC2 Preventive Maintenance BNelson 1.2016 BNelson 1.2016 BNelson 10.2015...
  • Page 2 Preventive Maintenance The maintenance and care procedures must be performed regularly to ensure maximum operating safety and lifespan. Irregularly observed maintenance and care procedures will lead to increased wear to the product. BNelson 1.2016 BNelson 1.2016...
  • Page 3 Preventive Maintenance What types of maintenance are there? Daily Maintenance Weekly Maintenance Bi-Weekly Maintenance Monthly Maintenance User-Defined Maintenance These intervals are defined based on a daily use of 3 – 4 hours daily or 25 hours a week. Depending on use, the service intervals may have to be adjusted.
  • Page 4 Preventive Maintenance Daily Maintenance Wipe down the bike after each use with disinfectant where the rider comes into contact with or bodily residues can be found. Seat Handlebars Shrouds/Frame BNelson 1.2016 BNelson 1.2016...
  • Page 5 Preventive Maintenance Daily Maintenance Adjust the feet of the bike to prevent it from rocking during use. BNelson 1.2016 BNelson 1.2016...
  • Page 6 Preventive Maintenance Daily Maintenance Never spray anything on the flywheel when it is in motion! We suggest cleaning the complete bike with a *soap and water solution once a day. *Soap and water solution: 1:10 soap to water. Soap can be a mild antibacterial dish soap.
  • Page 7 Preventive Maintenance Weekly Maintenance Before you start the weekly cleaning of the bike, open the levers for the height adjustment of the seat and handlebar. Lift the handlebar and seat into their maximum position. BNelson 1.2016 BNelson 1.2016...
  • Page 8: Preventive Maintenance

    PTFE as a lubricant as well We recommend using WD-40 to as Super Lube grease with PTFE when lubricate the felt brake pad and to performing the weekly cleaning and lubrication of your IC2 & IC3 Indoor clean the flywheel. Cycle. BNelson 1.2016 BNelson 1.2016...
  • Page 9 Preventive Maintenance Weekly Maintenance Spray *soap and water solution onto a soft cloth and clean the entire bike: *Soap and water solution: 1:10 soap to water. Soap can be a mild antibacterial dish soap. BNelson 1.2016 BNelson 1.2016...
  • Page 10 Preventive Maintenance Weekly Maintenance Spray Super Lube aerosol onto a soft cloth and clean: Stem and seat height adjustment It is very important to remove any residue from the stem and seat adjustment. The maintenance spray also lubricates the adjustments for smooth and easy extension and compression.
  • Page 11 Preventive Maintenance Weekly Maintenance Spray WD-40 onto a soft cloth and clean: Flywheel Cleaning with WD-40 will remove residue and prevent oxidation. NEVER SPRAY MAINTENANCE SPRAY OR ANYTHING ELSE DIRECTLY ON THE FLYWHEEL! BNelson 1.2016 BNelson 1.2016...
  • Page 12 Preventive Maintenance Bi- Weekly Maintenance Emergency break test To ensure operating safety, the emergency brake must be tested to make sure it is operating properly. BNelson 1.2016 BNelson 1.2016...
  • Page 13 Preventive Maintenance Bi- Weekly Maintenance Slider lubrication Push the slider into the forward position. Wipe off any residue with a clean cloth. Grease the following with Super Lube grease. a) Inside the notch b) Bottom flat surface c) Top flat surface Push the slider into the opposite position and repeat equally lubricating both sides of the slider...
  • Page 14 Preventive Maintenance Bi- Weekly Maintenance Brake Pad Lubricate the entire brake pad using WD- 40. This will be sure that the bike gives all levels of resistance. How to video: https://youtu.be/ozVNxWmPCfQ BNelson 1.2016 BNelson 1.2016...
  • Page 15 Preventive Maintenance Monthly Maintenance Bolts should be checked if they have loosened over time. Seat 25 Nm Crankshaft 60 Nm Pedals 55 Nm Levelers Hand tight The Levelers should be tested if they are easy to adjust. They should then be turned all the way back in.
  • Page 16 Preventive Maintenance Monthly Maintenance SPD system Lubricate pedal clips and pedal axle (spindle) with a small amount of Super Lube aerosol. BNelson 1.2016 BNelson 1.2016...
  • Page 17 Preventive Maintenance Monthly Maintenance Handlebar and seat post adjustment knobs Unscrew and lubricate the handlebar and seat adjustment knobs with a small amount of WD-40. BNelson 1.2016 BNelson 1.2016...
  • Page 18 Preventive Maintenance As Needed Maintenance Horizontal Locking Levers Re-align the seat post and handlebar levers to match graphic. This will be sure that the levers are out of the users way when riding. Attention: Never use force to over-tighten the levers as they can break BNelson 1.2016 BNelson 1.2016...

This manual is also suitable for:

Ic3