Table of Contents
Advertisement
troubleshooting
PROBLEM
Air flow
adjustment is not
working.
Fan speed
adjustment is not
working.
Remote
controller is not
working.
Timer function
does not set.
The indicator
is blinking
continuously.
Odors permeate
in the room
during operation.
Error is indicated.
Noise is
generated.
Smoke is
generated from
the outdoor unit.
Water is dropping
from the outdoor
unit piping
connection.
Maldives FJM Brazil_IB&IM_DB68-05639A-00_EN.indd 26
SOLUTION
• C heck if you have selected Auto/Dry/
these modes, desired temperature is set to auto and you
cannot adjust the temperature.
• C heck if you have selected Auto/Dry/Turbo/
mode. In these mode, fan speed is set to Auto and you
cannot adjust the fan speed.
• Check if your batteries are depleted.
• Make sure nothing is blocking your remote controller
sensor.
• C heck that there are strong lighting apparatus near the air
conditioner. Strong light which comes from fluorescent
bulbs or neon signs may interrupt the electric waves.
• C heck if you press the Set button on the remote controller
after you have set the time.
• P ress the Power
button or disconnect the power plug/
switch off the auxiliary power switch.
If the indicator is still blinking, contact the service center.
• C heck if the appliance is running in a smoky area. Ventilate
the room or operate the air conditioner in Fan mode for
1~2 hours. (We do not use smelly components in the air
conditioner.)
• W hen an indoor unit indicator blinks, contact the nearest
service center.
• D epending on the status of the air conditioner usage, noise
can be heard when refrigerant flow movement changes. It is
normal.
• I f may not be a fire but it can be a steam generated by the
defrost operation from outdoor heat exchanger during Heat
mode in winter.
• Water may be generated because of the temperature
difference. It is normal.
English-26
mode. In
2015/8/15 10:44:58
Advertisement
Table of Contents
