Midea MSA-OASIS-P25-I User Manual page 46

HOW TO USE THE ADVANCED FUNCTIONS
ECO
Note: This function is only available under COOL mode.
Used to enter the energy efficient mode.
Under cooling mode, press this button, the remote controller
will adjust the temperature automatically to 24°C, fan speed
of Auto to save energy(but only if the set temperature is less
than 24°C). If the set temperature is above 24°C , press
the ECO button, the fan speed will change to Auto, the set
temperature will remain unchanged.
Note: Pressing the ECO button, or modifying the mode or
adjusting the set temperature to less than 24°C will stop
ECO operation.
Under ECO operation, the set temperature should be 24°C
or more. It may result in insufficient cooling. If you feel
uncomfortable, just press the ECO button again to stop it.
SLEEP function
The SLEEP function is used to decrease energy use while you
sleep (and don t need the same temperature settings to stay
comfortable). This function can only be activated via remote
control.
For the detail, "see sleep" operation in "USER S MANUAL".
NOTE:
The SLEEP function is not available in FAN or DRY
mode.
FOLLOW ME
The Follow me function enables the remote control to measure the
temperature at its current location and send this signal to the air
conditioner every 3 minutes interval. When using AUTO, COOL,
or HEAT modes, measuring ambient temperature from the remote
control (instead of from the indoor unit itself) will enable the air
conditioner to optimize the temperature around you and ensure
maximum comfort.
Silence function
Hold down Fan speed button for 2 seconds to activate/cancel
Silent mode. Due to low frequency operation of compressor, it
may result in insufficient cooling and heating capacity. (applicable
to the air conditioner with Silent feature only)
8°C Heating Function
When the air conditioner operates under heating mode with the
set temperature of 16°C, press Temp button twice in one second
will activate 8 Degree heating function. The unit will operate at a
setting temperature of 8°C. The indoor unit display shows "FP".
Mode
Timer Timer
LED
Turbo
46
46
Hold down
Fan button for
2 seconds to
activate Silence
function.
ON/OFF Fan
Press this button
twice in one second
to activate 8°C
heating function.
Follow
me
Self
clean