Midea MSA-OASIS-P25-I User Manual page 36

FUNCTION BUTTONS
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote control. The following is a brief
introduction to the remote control itself. For instructions on how to operate your air conditioner, refer to the How to Use The Basic/Advance
Functions section of this manual.
Turns the unit on or off
Scrolls through operation modes as follows:
AUTO COOL DRY
Starts and stops energy efficient feature.
If hold down this button for more than
2 seconds, the sleep feature is activated.
Sets timer to turn unit on and off (see for
instructions) How to Use Basic Functions.
Turns indoor units LED display on and off.
Press the button to activate/deactivate
FollowMe function or to display the room
Enables unit to reach preset temperature
in shortest possible time.
ON/OFF
ON/OFF
HEAT FAN
ECO/SLEEP
TIMER/SLEEP
LED
FOLLOW ME
temperature.
TURBO
Mode ON/OFF Fan
Timer Timer
Follow
LED
me
Self
Turbo
clean
INTELLIGENT EYE
Detects the people activities
in the room.
36
36
FAN
Selects fan speeds in the following order:
AU% 20% 60%
40% 80% F% (100%).
Press the Adjust or button to
increase/decrease the fan speed in
1% increments.
TEMP +
Increases temperature in 0.5°C (1°F)
increments. Hold down this button
to increase temperature in 1°C (1°F)
increments. Max. Temperature is
30°C (86°F).
TEMP –
Decreases temperature in 0.5°C (1°F)
increments. Hold down this button to
decrease temperature in 1°C (1°F)
increments. Min. temperature is
16°C (60°F).
SWING
Starts and stops horizontal louver
movement.
SWING
Starts and stops vertical louver
movement.
SELF CLEAN
Starts and stops the unit self clean
feature.