Midea MSA-OASIS-P25-I User Manual page 37

HANDLING THE REMOTE CONTROLLER
NOT SURE WHAT A FUNCTION DOES?
Refer to the and How to Use Basic Functions and How to Use Advanced Functions sections of this manual for a detailed description of how
to use your air conditioner.
SPECIAL NOTE
Button designs on your unit may differ slightly from the
example shown.
If the indoor unit does not have a particular function,
pressing that function s button on the remote control will
have no effect.
INSTALLING REMOTE CONTROL HOLDER
The remote controller can be attached to a wall or stand by using
a remote controller holder.
1. Before installing the remote controller, check that the air
conditioner receives the signals properly.
2. Install the holder with two screws.
3. Put the remote controller in the holder.
INSERTING AND REPLACING BATTERIES
Your air conditioning unit comes with two AAA batteries. Put the
batteries in the remote control before use:
1. Remove the back cover from the remote control, exposing
the battery compartment.
2. Insert the batteries, paying attention to match up the
(+) and (-) ends of the batteries with the symbols inside the
battery compartment.
3. Install the back cover on.
BATTERY NOTES
For optimum product performance:
Do not mix old and new batteries, or batteries of different
types.
Do not leave batteries in the remote control if you don't plan
on using the device for more than 2 months
BATTERY DISPOSAL
Do not dispose of batteries as unsorted municipal waste. Refer to
local laws for proper disposal of batteries.
37
37
ENGLISH
Put the remote
controller in the
holder.