3-10) Motor Damper - Samsung RS757LHQESR/ Series Service Manual

FULL DISASSEMBLY AND ASSEMBLY

3-10) Motor Damper

Part Name How To Do
① Disassemble circled
2screws.
② Pull out Condenser from
PCB-BOX :
PCB-BOX.
CONDENSER
※ Be careful do not change
the terminals during
assembly.
① Disassemble the Cover Grill,
disassemble the 3 welded
sections.
② Disassemble 3-way Valve
then disassemble 2 screws
3-WAY
and pull out Housing.
※ Be careful do not change
VALVE
the pipe during assembly
(red one is for Freezer)
Wrong connection of pipes
alter the gas flow and cause
performance issues.
① Pull out Fan Ass'y refer to
figure disassemble circled 2
screws.
② First disassemble the locking
CONDENSER
spring of Fan, second
disassemble 2 screws for
FAN MOTOR
mounting Motor Cover, third
disassemble the wire Housing
and then pull out the Motor by
rotating it.
① Disassemble (circle)2 screws
mounting bracket and
POWER
Housing connected to PCB-
SWITCH
BOX then pull out Power
switch from the bracket.
① Disassemble 5 screws located
INSULATION
at the back of Power switch.
COVER OF
② The pipes are covered with
CONNECTING
insulation tubeing left is for
PIPE
Freezer, right is for Fridge.
① After disassembling Cover
Grill, disassemble the
housing of switch like in the
DOOR
Figure.
SWITCH
② Disassemble the switch by a
pulling down with squeezing
the lock hooks.
Descriptive Picture
29