Citizen Eco-Drive Instruction Manual page 63

1
Pull the crown out to position 1 .
2
Press and hold the lower right button A for 5 seconds
or more.
The hands and indication move to their current reference
position.
• Release the button as the hands start to move.
• Proceed to the next step when the hands and indication
stop.
3
Check the current reference position.
Refer to the figure on the previous page.
Correct
Wrong
No adjustment is required. Push the crown in to
position 0 to finish the procedure.
Proceed to step 4 and correct the reference
position.
Troubleshooting (H29*)
Continued on the next page
61