Sony DVP-FX930 Operating Instructions Manual page 14

To resume playback from the point
where you stopped the disc (Resume
Play)
When you press N again after you stop
playback, the player starts playback from
the point when you pressed x.
z
• To play from the beginning of the disc, press
x twice, and press N.
• When turning power on again after power off,
resume play starts automatically.
b
• Depending on the stop point, Resume play
may not start from exactly the same point.
• The resume point is cleared when:
– you turn off the player (including standby
mode) while playing a DVD (VR mode).
– you open the disc lid.
– you press INPUT.
– you disconnect the adaptor or remove the
battery pack before turning off the player.
Notes on the screen saver
• A screen saver image appears when you
leave the player in pause or stop mode
without operation for more than 15
minutes. The image disappears when you
press N. For the setup of "Screen
Saver," see page 20.
• The player goes to standby, 15 minutes
after starting the screen saver function.
Press N to come out of standby mode.
14
About various playback operations
To Operation
Change the LCD Press OPTIONS to
picture size select "LCD Mode"
(page 17).
Display the DVD Press MENU (page 6)
menu or TOP MENU
(page 7).
Check the DVD Press DISPLAY
playback (page 15).
information
Play DVDs* Press DISPLAY to
repeatedly select "Repeat"
(Repeat Play) (page 15).
Press C/c repeatedly on
Play DVDs in
fast reverse or the player to select the
fast forward speed (page 6).
(Scan Play)
Switch between Press TOP MENU
original and repeatedly (page 7).
Playlist in DVD
(VR mode)
Change the CD Press DISPLAY
playback repeatedly (page 6).
information
Play CDs Press MENU
repeatedly repeatedly (page 6).
(Repeat Play)
Play CDs Press MENU
randomly repeatedly (page 6).
(Random Play)
* DVD VIDEO only