EAS Electric EMG11BT Instruction Manual page 40

● Type of Installation (B22)
● Installation of compulsory gas supply and exhaust pipe of the unit:
a. Installation mode of topside exhaust.
Supply and exhaust pipe
Incline downward by 3°
As show in the figure below, tap in expansion screws for fixation, hang the unit vertically and screw it
down with nuts, insert plastic plugs below it and screw down self-tapping screws.
Packing seal
Self-tapping screw ST4.2×6.5(three)
Considering the mounting inclination of 3°,
this dimension will be determined on the unit's
mounting position relative to the sidewall.
90
13
Elbow
Self-tapping screw
1 mounting holes for
expansion screws
3-Ф8
2 mounting holes for self-tapping
screw plastic plug
V.1