EAS Electric EMG11BT Instruction Manual page 38

As show in the figure below, tap in expansion screws for fixation, hang the unit vertically and screw it
down with nuts, insert plastic plugs below it and screw down self-tapping screws.
b. Installation mode of top rear exhaust.
Incline downward by 3°
As show in the figure below, tap in expansion screws for fixation, hang the unit vertically and screw it
down with nuts, insert plastic plugs below it and screw down self-tapping screws.
Packing seal
48
3-Ф8
90
EMG11BT / EMG11NG / EMG13BT / EMG13NG
Considering the mounting inclination of 3°,
this dimension will be determined on the unit's
mounting position relative to the sidewall.
90
Ф 110 ~ Ф 120 round hole
Wall-through hole
1 mounting hole for
expansion screws
2 mounting holes for
self-tapping screw
plastic plug
11
1 mounting holes for
expansion screws
3-Ф8
2 mounting holes for self-tapping
screw plastic plug
V.1