EAS Electric EMG11BT Instruction Manual page 39

● Type of Installation (C32)
● Installation of compulsory gas supply and exhaust pipe of the unit:
a. Installation mode of topside exhaust.
Self-tapping screw
As show in the figure below, tap in expansion screws for fixation, hang the unit vertically and screw it
down with nuts, insert plastic plugs below it and screw down self-tapping screws.
Ф 110 ~ Ф 130 round hole
Wall-through hole
Supply and exhaust pipe
Self-tapping screw ST4.2×6.5
1 mounting holes for
expansion screws
3-Ф8
2 mounting holes for self-tapping
90
screw plastic plug
12
V.1