Sdram Module Combination; Installing Sdram Modules - MSI Micro ATX Manual

SDRAM Module Combination

You can install memory modules in any combination as follows:
Slot
Slot 1
(Bank 0 & Bank 1)
Slot 2
(Bank 2 & Bank 3)
Total System Memory
Memory Population Rules
1. Supports only SDRAM DIMM.
2. To operate properly, at least one 168-pin DIMM module must be installed.
3. This mainboard supports Table Free memory, so memory can be installed on
DIMM1 or DIMM 2 in any order.
4. Supports 3.3 volt DIMM.

Installing SDRAM Modules

1. The DIMM slot has 2 Notch Keys "VOLT and DRAM", so the
DIMM memory module can only fit in one direction.
Front View
2. Insert the DIMM memory module vertically into the DIMM slot.
Then push it in.
3. The plastic clip at the side of the DIMM slot will automatically close.
Memory Module
64MB, 128MB,
256MB, 512MB, 1GB
64MB, 128MB,
256MB, 512MB, 1GB
Rear View
DRAM VOLT
2-7
Hardware Setup
Total Memory
64MB~1GB
64MB~1GB
64MB~2GB