Table of Contents
Advertisement
GETTING COMFORTABLE
Operation in Automatic Mode
1
Automatic Control Button: This system automatically controls all of the climate
systems except defogging. Press "AUTO" to activate. Press "OFF" to turn off the
system.
2
Temperature Control Dial: Turn the dial clockwise to increase the temperature or
counterclockwise to decrease the temperature. The temperature will appear on the
screen. You can adjust separate temperature settings for the driver's side and
passenger's side.
3
Dual Button: Press the button to activate or deactivate the dual mode. Dual mode
makes it possible to have separate temperature settings for the driver's side and
passenger's side.
When using automatic mode, the fan speed, airflow distribution, air-inlet control and air
conditioning compressor are controlled automatically. To activate:
1. Press the "AUTO" button. The "FULL AUTO" indicator light illuminates on the climate
control display.
2. Set the preferred temperature using the temperature control dial.
If you operate any of the buttons other than "OFF", rear window defogger, DUAL or the
temperature control dial, the "FULL" indicator light will turn off. The "AUTO" light will
remain illuminated. You can then manually control the system as desired. Press the
"AUTO" button to change back to "FULL AUTO" mode.
Operation in Manual Mode
4
Recirculated/Outside Air Button: Press this to prevent outside air from entering
your Subaru. Press the button again to allow outside air into your Subaru. NOTE: To
prevent windshield fogging, do not remain in the recirculated mode for an extended
period of time.
5
Fan Speed Control Dial: Turn the fan speed control dial to increase or decrease fan
speed.
6
Airflow Mode Selection Button: Press the button to select the desired airflow mode.
The selected mode – ventilation, bi-level, feet or feet-defrost – is shown on the
display.
12
Advertisement
Table of Contents
