Download Print this page

Digital Watchdog SiteWatch DW-DTWMDTLA5 Quick Start Manual

Wall-mount bracket for laser sensor

Advertisement

Quick Links

Wall-mount bracket for SiteWatch™ laser sensor
1x wall mount bracket for DW-DTLA500 laser sensor
1x Allen key
4x mounting screws (bracket to laser base)
1x rubber gasket
1x quick setup guide
NOTE:
Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources.
2. Search for your product by entering the part number in the 'Search by Product' search bar. Results
for applicable part numbers will populate automatically based on the part number you enter.
3. Click 'Search'. All supported materials, including manuals and quick start guide (QSGs) will
appear in the results.
Attention: This document is intended to serve as a quick reference for initial setup.
It is recommended that the user read the entire instruction manual for complete and proper installation and usage.
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
DW-DTWMDTLA5
WHAT'S IN THE BOX
Quick Start Guide
digital-watchdog.com

Advertisement

loading

Summary of Contents for Digital Watchdog SiteWatch DW-DTWMDTLA5

  • Page 1 Quick Start Guide Wall-mount bracket for SiteWatch™ laser sensor DW-DTWMDTLA5 WHAT’S IN THE BOX 1x wall mount bracket for DW-DTLA500 laser sensor 1x Allen key 4x mounting screws (bracket to laser base) 1x rubber gasket 1x quick setup guide NOTE: Download all your support materials and tools in one place.
  • Page 2 Once the required position is achieved, tighten the tilt screw on the bottom of the wall-mount to complete the installation. Copyright © Digital Watchdog. All rights reserved. Specifications and pricing are subject to change without notice.