Digital Watchdog DWC-MTTWM2 Quick Start Manual

Wall mount bracket for vandal dome, vandal ball and vandal fisheye cameras

Wall mount bracket for vandal dome, vandal ball and

Mounting Screws and Anchors (PA4x25mm, head diameter 8mm)

Camera Mounting Screws (PM4x10mm, head diameter 6.6mm)

Mounting Template

Hexagonal Wrench (3mm)

NOTE:

Download all your support materials and tools in one place.

Go to: http://www.digital-watchdog.com/resources

Search your product by entering the part number in the 'Search by Product' search bar. Results

for applicable part numbers will populate automatically based on the part number you enter.

Click 'Search'. All supported materials, including manuals

and quick start guide (QSGs) will appear in the results.

Tel: +1 (866) 446-3595 / (813) 888-9555

Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday

vandal fisheye cameras

DWC-MTTWM2

WHAT'S IN THE BOX

Quick Start Guide

digital-watchdog.com

Table of Contents

Need help?

Do you have a question about the DWC-MTTWM2 and is the answer not in the manual?

Page 1 Quick Start Guide Wall mount bracket for vandal dome, vandal ball and vandal fisheye cameras DWC-MTTWM2 WHAT’S IN THE BOX Mounting Screws and Anchors (PA4x25mm, head diameter 8mm) Camera Mounting Screws (PM4x10mm, head diameter 6.6mm) Mounting Template Hexagonal Wrench (3mm) NOTE: Download all your support materials and tools in one place.
Page 2 Adjust the camera’s position and angle by loosening the lock screw at the base of the camera. When the camera’s desired position is achieved, secure the lock screw back in place to complete the installation. Copyright © Digital Watchdog. All rights reserved. Rev Date: 12/21...