Pyle PLINTBL7 User Manual page 9

Q: My GPS gets no reception.
A: Check if the antenna properly connected.
A: Mount Antenna directly to your vehicle (GPS antenna is to be magnetically mounted, it will boost GPS
reception when attached)
A: Check alternate antenna placement to test for interference
Q: How to I set the time?
A: System setting, set time
Q: How do I turn up GPS instruction volume (I Can't hear it over music)
A: Change GPS sound settings
Go to Navi > Settings > Sounds > Set GPS voice level to max > Set radio volume to min (Adjust accordingly)
Q: Where can I download rmware updates?
A: This unit's hardware does not allow it to be updated with new OS or rmware.
Q:
My BT microphone is not working as expected.
A: Check that nothing is covering microphone port.
Check to see if closer proximity to the mic a ects its pickup
Check that phone connection is good
Make sure the call recipient has speaker volume set to an appropriate level
Check that the mic is not picking up too much background noise
Note: The built-in mic cannot be changed, replaced or upgraded.
Q: I am having trouble setting up Wireless BT.
A: Check that your device is Wireless BT compatible 4.0+
Check if you are able to pair with alternate devices via Wireless BT.
Clear out your device history in your Wireless BT setting menu and attempt to pair/connect again
Q: How do I play video les? My unit cannot read my digital video les.
A: Make sure SD card is compatible
A: Check le format of your le. (You may need to convert your video le to an alternate le format)
You have entered the 'Touch Screen Calibration Menu' . For optimum touchscreen performance, this
feature enables you to enjoy the best functionality of your device's touch screen.
To complete the touchscreen calibration, an "X" will appear in the circles on the screen in numbered
order, continue to press the center of the "X" as it passes through each numbered circle.
(In circle number one, you will see an "X", touch the center of the "X", then the "X" will move to circle
number two. Continue to touch the center of the "X" as it will move to the other circles in numbered order.
If calibration senses an error, the process may restart; Repeat if necessary.)
8
www.PyleUSA.com