B) Basic Functions - Renkforce RF-DAB-IR-1700 Operating Instructions Manual

b) Basic Functions

Switching on/off
• To turn standby on or off, press the
The display (5) shows the date and time in standby mode. In addition, the standby indicator (3) will light up.
• To switch the power supply of the device on or off, press the ON/OFF switch (16) on the back of the device.
ON > Device is supplied with power
OFF > Device is not supplied with power (e.g. to save energy)
When the power is switched off, energy is saved, but the settings of the network, favourite memory, etc. are
retained. However, an alarm function is not possible when the power supply is switched off.
General Operation
• Turning the TUNE/SELECT knob (9) will adjust the volume of the headset and select functions or change settings/
values in the menu.
• If you push the rotary knob TUNE/SELECT (9) like a conventional button, this confirms a selection or a setting.
• You can adjust the volume of the headphones by adjusting the buttons
sound.
• Use the remote control with the arrow buttons (20) to navigate in the menu.
• The BACK (7) button will take you a step back in many functions or settings.
• The FORWARD (8) button will take you a step forward in many functions or settings.
• The button MODE (28) switches through the different operating modes. When you push this button, the device
switches to the respective next operating mode.
• The MENU (6) or
button (1) on the unit or the remote control.
(23) button opens the radio's main menu.
/ (31). The (17) key mutes the
53