Operation; A) General Functions - Renkforce NE-6208 Operating Instructions Manual

Ensure that the voltage indication on the AC/DC adapter matches the mains
voltage of your power supply. Never try to operate the AC/DC adapter with
any other voltage.
Be careful when handling AC/DC adapters and mains connections. Mains
voltage may cause potentially fatal electric shock.
Make sure that no cables lie around openly. Install cables professionally to
prevent accidents.
• Connect the low-voltage plug of the AC/DC adapter to the AC/DC adapter connection
DC 6V on the right side of the device.
• Plug the AC/DC adapter into a mains socket.
• At first commissioning, the message "Time is not set" appears in the display (2).
When receiving DAB stations, the time will set itself automatically. If only FM recep-
tion is possible, the time can also be set manually (see "System Settings/Setting time
and date").

9. Operation

a) General Functions

Switching on
• Push the button STANDBY (1) to switch on the device.
• After first activation, the device will automatically perform a station scan in the DAB
reception range. During the search, the display information shows progress and the
number of stations found.
• After completion of the station scan, the first station in alphanumeric order is played
back.
If no stations are found, no signal could be received. In this case, move the
device or align the telescopic aerial differently, and perform the station scan
again.
30