Electrical Connection; Using The Radio; A) Basic Functions - Renkforce RF-IR-PSOCKET1 Operating Instructions Manual

Flush-mount radio

Hide thumbs Also See for RF-IR-PSOCKET1:

Table of Contents

8. Electrical connection

Make sure that the voltage indicated on the product corresponds with your household mains voltage. Never

attempt to operate the device with any other type of voltage.

Exercise caution when handling power adapters and mains connections. Mains voltages can cause fatal

electric shocks.

Plug the device into a wall socket.

In this menu, options have been left in English in the German version of the manual, a German explanation

is provided in brackets.

Standby mode

• Press the STANDBY button (6) to enable/disable standby mode.

In standby mode, the display (1) shows the time and weather data (when enabled via the menu).

Basic operations

• Use the NAVIGATE/VOLUME control (10) to set the volume, select functions, and change the settings/menu op-

tions.

• Press the

button (4) to navigate to the previous setting or function.

• Press the

button (5) to navigate to the next setting or function.

• Press the NAVIGATE/VOLUME control (10) to confirm a selection or setting.

• Press the MODE button (2) to select the operating mode. The radio switches to the next mode each time you press

the button.

• Press the PRESET button (7) to access the favourites list, save a station or select a saved station.

• Press the MENU button (3) to access the main menu.

• Press the ALARM button (8) to access the alarm settings.

• Press the SLEEP button (9) to activate the sleep timer. The radio will switch off automatically after the preset time

has elapsed. Keep pressing the button until the desired sleep time is shown on the display.

This button takes you straight to the "SLEEP TIMER" options in the "CONFIGURATION" menu.

Table of Contents