mabe MTM482SENSS0 Owner's Manual page 36

36
operation instructions
display
The first time the power is supplied to the refrigerator, the display
screen will completely turn on for 3 seconds, then the display enters
the normal operation status.
The default setting temperature for the fresh food compartment
and freezer compartment is 37°F/0°F (3°C/-18°C) respectively.
Press the Frz. Temp and Ref. Temp pads at the same time for 3 sec-
onds to change between Celsius and Fahrenheit units.
When an error occurs, the display shows the error code (see next
page). During normal operation, the display shows the set tempera-
ture for the fresh food or freezer compartments.
Under normal circumstances, if there is no operation on display
panel or door-opening action within 30 seconds, the display will be
automatically locked, in the LOCKED state, the light of display will
go out after 30 seconds.
control panel Lock/Unlock
In the unlocked state, press and hold for 3 seconds the LOCK pad to
enter the lock state. The LOCK icon lights up, this indicates that the
control panel is locked. At this moment, pads will be inoperative.
In the locked state, press and hold for 3 seconds the LOCK pad to
unlock the control panel. The LOCK icon turns off, this indicates that
the control panel is unlocked. At this moment, pads will be opera-
tive again.
Temperature adjustment of the fresh food
compartment
Press the REF. TEMP pad to adjust the fresh food compartment tem-
perature. Each press of the pad will decrease the temperature of the
fresh food compartment 1°F. The temperature setting range for the
fresh food compartment is 34°F to 44°F (1,1°C to 6,7°C). When the
fresh food compartment temperature is 34°F (1,1°C) and you press
the pad again, the fresh food compartment temperature will
change to 44°F (6,7°C).