DeWalt DW892 Instruction Manual page 7

384417/DW892 .1 7/15/02 11:46 AM
Cleaning
Blowing dust and grit out of the main housing by means of air hose
is recommended and may be done as often as dirt is seen collecting
in and around the ventilator vents. The motor should be running while
air is being blown into the air vents.
Lubrication
D WALT tools are properly lubricated at the factory and are ready to
E
use. Tools should be relubricated regularly every 60 days to 6
months, depending on usage. Tools used constantly on production or
heavy-duty jobs and tools exposed to heat may require more
frequent lubrication. This lubrication should only be attempted by
trained power tool repairmen such as those at D
service centers.
Accessories
Recommended accessories for use with your tool are available at
extra cost from your distributor or local service center.
CAUTION: The use of any non-recommended accessory may be
hazardous.
Important
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
Full Warranty
D WALT heavy duty industrial tools are warranted for one year from
E
date of purchase. We will repair, without charge, any defects due to
faulty materials or workmanship. For warranty repair information,
call 1-800-4-D WALT. This warranty does not apply to accessories or
E
damage caused where repairs have been made or attempted by
Page 4
others. This warranty gives you specific legal rights and you may
have other rights which vary in certain states or provinces.
In addition to the warranty, D
If you are not completely satisfied with the performance of your
D WALT heavy duty industrial tool, simply return it to the participating
E
seller within 30 days for a full refund. Please return the complete unit,
transportation prepaid. Proof of purchase may be required.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-D
replacement. To request replacement labels, you will need to know
the rated rpm of your tool. The rpm of you tool is stamped into the tool
housing.
WALT certified
E
4
WALT tools are covered by our:
E
30 DAY NO RISK SATISFACTION GUARANTEE
WALT for a free
E