Replacing The Motor Convection - Samsung NX58M6850S Series Service Manual

3. Disassembly and Reassembly

3-28 Replacing the Motor Convection

CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be present,
and you can cut yourself if you are not careful .
Parts
MOTOR
CONVECTION
Explanation Photo
CONNECTOR
Note .2
Fan
Fan Nut
Unbend the bracket
1. Follow the Step in 3-2
2. Note, mark, and disconnect wires
or connector going to the motor
convection
3. Open the oven door and remove
the racks from inside the oven .
4. Remove 2 screws and the interior
cover casing from the back wall of
the oven cavity .
NOTE
When you install the upper cover
casing, please refer to the pictures.
5. Remove the fan nut, fan blade
from the motor convection shaft .
(The convection nuts have CCW/CW
threads to remove each nut .)
NOTE
Do not fasten fan nuts too tight.
6. Unbend the bracket of the back
main to the rear of the range .
7. Pull the motor convection straight
out while rotating the motor
convection counterclockwise .
8. When the service is complete,
reverse the order to install the
motor convection .
49
Explanation