Removing Convection Element, Fan-Convection And Motor-Convection - Samsung NE58F9710WS Service Manual
Slide in range
Hide thumbs
Also See for NE58F9710WS:
- User manual (240 pages) ,
- Service manual (54 pages) ,
- User manual (160 pages)
Table of Contents
Advertisement
3. Disassembly and Reassembly
Parts
Convection
Element, Fan-
Convection
, Motor-
Convection
CAUTION
Be careful not to bend the Fan-Convection(Blade)
* Reassembly of All part is the reverse order of disassembly.
Explanation Photo
Bracket convection
heater
17
Explanation
1.
Disconnect power and remove oven racks.
2.
Pull the range out of its mounting location so
that you can access the rear of the unit.
3.
Remove Cover-Back Main Wire from the unit.
(See step 3 on page 10 for procedure)
4.
Remove oven door. (See Page 29 on page
for procedure)
5.
Unscrew 2 screws and remove Cover-Casing.
6.
Unscrew 2 screws and remove Bracket-
Convection
Heater to remove Heater-Convection.
7.
Unscrew nut of Fan-Convection, and 2 Fan-
Convection.
8.
Unscrew 3 points and disconnect a Motor-
Convection
wire and disconnect Heater-Convection wire.
Hide quick links:
Advertisement
Table of Contents
