3. Disassembly and Reassembly
3-14 Replacing the Door Plunger
Parts
Door
Plunger
Explanation Photo
Shield
Door Plunger
30
Explanation
5 .
Remove 1 screw of the shield and separate
the shield .
6 .
Disconnect the wire to the door plunger .
7 .
Carefully pull out the door plunger from the
upper right corner of the cavity front . Gently
grasp the plunger with pliers and work from
side to side while pulling .
8 .
Replace with the door plunger, reconnect the
wires in their original positions, and reinstall
plunger in the oven frame .