Store And Forward; Sds Receive Failure Notification; Dmo Sds Transmit Traffic Stealing; Collaborative Messaging - Motorola ST7500 Product Information Manual

MN004527A01-AG
Chapter 2: Services and Features
The radio selects the E2EE mode for the outgoing text message in accordance to the address
association and requirements for the E2EE High Security Mode. Depending on codeplug settings, you
can override the address association and select using the MMI menu whether an SDS is sent to clear
or encrypted contact (Group or Private Number).
The radios support the high security mode configurable using the CPS. In this mode, the association
that binds the address to a given cryptogroup is always mandatory.
If no cryptogroup associations exist, this condition means that the keys are not loaded. In such
situation, the radio discards any outgoing or incoming message that is encrypted. You are alerted
when this situation occurs.
This feature can only be disabled using the Key Variable Loader (KVL).
2.13.7

Store and Forward

This feature allows communicating with each other without being available at the same time. If the
destination is not reachable, the message is stored in the system (if supported) until it is available or
the expiration time is exceeded. The system is configured to delete the message after a preconfigured
time and this time cannot be configured using the radio.
You can send the store and forward messages to an individual address or a group. Depending on the
codeplug settings, if you choose to send it to the group, the message status is switched from Store
and Forward to Immediate.
When the Sending group message to Store and Forward Server is enabled, an SDS message sent
to a group is conveyed with assistance of the store and forward service. The radio sends Store and
Forward SDS to group only with Delivery Report Request set to None by the service provider. For
Store and Forward SDS to an individual address, the radio can send SDS with any Delivery Report
Request (None, Received, Consumed, Received and Consumed) the user set (from the MMI or
codeplug settings). The radio does not request a delivery report, thus you are not notified of the
delivery status.
NOTICE: Verify whether the infrastructure system supports this functionality.
2.13.8

SDS Receive Failure Notification

When a radio fails to decrypt a received SDS message, it displays a notification including the ISSI of
sender and reason for failure.
2.13.9

DMO SDS Transmit Traffic Stealing

DMO SDS Transmit Traffic Stealing enables your radio to send status or SDS during voice call
transmission by replacing audio frame with the status or SDS payload.
This feature is only applicable in Direct Mode Operation (DMO).
2.14

Collaborative Messaging

This feature allows external device to send/receive message when the radio application is enabled. It is
mutually exclusive with Secure SDS Storage feature and EtE High Security Mode Feature. The
42