Installation - Alarm.Com ADC-V515 Installation Manual

Installation

Choose the appropriate installation wizard
(customer or technician) below or proceed to the AP mode
or WPS mode section to begin adding the camera.
Customer - Mobile App Installation Wizard
❶
Log in to the Mobile App. You will need the username
and password of the account to log in.
❷
Tap the navigation menu.
❸
Tap + Add Device > Video Camera > ADC-V515.
(If you do not see the Add Device option, please use the
AP mode or WPS mode instructions below to complete
your installation.)
❹
Follow the on-screen instructions to finish
adding the camera.
Service Provider Technician - MobileTech Installation
❶
Log in to MobileTech.
❷
Select the customer's account.
❸
Tap Quick Actions > Add Device > Video.
❹
Follow the on-screen instructions to finish
adding the camera.
AP mode
To ensure sufficient Wi-Fi signal, complete these
steps with the camera near its final location
but prior to mounting.
❶
Connect the camera's AC power adapter and plug it
into a non-switched outlet.
❷
The camera's LED will begin to blink white.
If the LED is not white after two minutes, hold down
the Reset button
to blink white (about 6 seconds).
continued
and release when the LED begins
3