Magic Chef MCWC52BF Manual page 3

Table of Contents

Advertisement

Available languages

Available languages

Before Putting Into Use
Before connecting the appliance to electrical
power supply, leave it to stand for about 2 hours,
which will reduce the possibility of malfunctions
in the cooling system due to transport handling.
Clean the appliance thoroughly, especially in the
interior (See Cleaning and Maintenance).
In case the interior accessories are not correctly
placed, rearrange them as described in chapter
"Description of the
Appliance".
Instructions for Use
These instructions for use are intended for the user.
They describe the appliance and correct operating
procedures for safe use .
SAVE THESE INSTRUCTIONS:
Tips for Energy Saving
Try not to open the door too often, especially when
the weather is hot and humid. Once you open the
door , close it as soon as possible. This is
especially important if you have an upright model .
Every now and then check if the appliance is
sufficiently ventilated ( adequate air circulation
behind the appliance ).
Set the thermostat from higher to lower settings as
soon as possible (depends on how loaded the
appliance is, ambient temperatures etc.).
Ice and frost layers increase energy consumption,
so clean the appliance as soon as the frost layer
is 3-5mm thick.
If the gasket is damaged or the door seal is
·
poor, energy consumption is substantially
higher. To restore efficiency, replace
the gasket.
Always consider instructions stated in
·
sections Positioning and Energy Saving
Tips, otherwise the energy consumption is
substantially higher.
2

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MCWC52BF and is the answer not in the manual?

Questions and answers

Table of Contents