3
Procedure for setting
up the DSX
3.1
Unfold and adjust the
handle
3.2
Attach and connect
the tablet
20
Setup
The setup procedure of the DSX consists of the following steps:
Unfolding and adjusting the handle (refer to "3.1 Unfolding and Adjusting
•
the Handle")
Inserting the battery (refer to "3.3 Inserting the Battery")
•
Attaching and connecting the CT1000 tablet (refer to "3.2 Attaching and
•
Connecting the Laptop or Tablet")
Mounting the pole support (optional; refer to "3.4 Mounting the Pole Sup-
•
port (Surveyor Kit Only)")
Calibrating the encoders (refer to "3.6 Calibrating the Encoders")
•
Unfolding and Adjusting the Handle
1
0019569_001
1.
Unlock the hinges on the inner side of the handles and expand the
handles.
2.
When the handles reach the hard-stop, lock the hinges.
3.
Unlock another hinges on the outer side of the housing and raise
the handles.
Lock the hinges when the handles are raised to an optimal inclina-
tion.
Loosen the screws on both sides to adjust the handle height.
Tighten the screws once the handle height adjustment is done.
Attaching and Connecting the Laptop or Tablet
The support is designed to hold a CT1000 tablet.
☞
0019586_001
2
3
Setup