Shehds 2eyes 200W LED COB Blinder RGBWA+UV 6in1 User Manual

2eyes 200W LED COB Blinder RGBWA+UV 6in1

Lighting

Maintenance

1.Please keep the light in dryness and avoiding use in wet place.

2.Using intermittenlly can be extended the life.

3.Attention to clean the fan and lens usually in order to get the ventilating effects and lighting effects

better.

4.Please do not wipe the crust using organic menstruum for avoid to damaged the product.

The product has well capability and intact packing when leave factory,All of the user should comply with

above warning item and manual ,any misuse cause of the damages are not included in our guarantee,and

also can't be responsible for any malfunction & problem owing to ignore the manual.

Please forgive that we will not be notice for technical change

1.For guarantee the life of product,please do not put it on the wet place and not use it the place over 40

degree.

2.Please don't lay the product on the un-fixable or shakable place.

3.Ask for the professional to maintain the product in order to avoid the danger of get an electric shock.

4.Power supply should not be changed over +&-10% while the light is using,it will be decreased the life

Table of Contents

Do you have a question about the 2eyes 200W LED COB Blinder RGBWA+UV 6in1 and is the answer not in the manual?

Page 1 2eyes 200W LED COB Blinder RGBWA+UV 6in1 Lighting Maintenance 1.Please keep the light in dryness and avoiding use in wet place. 2.Using intermittenlly can be extended the life. 3.Attention to clean the fan and lens usually in order to get the ventilating effects and lighting effects better.
Page 2 of lamp if the power is too high,but it will be influenced the luminosity if the power is too low. 5.After power off,if it is need used again,please cool down over 20 minuter. 6.Please look round the manual for ensure the product can be used normally. DMX Channel Summary-6 Channels Mode Channel Value...
Page 3 Display Control Instruction Display Value Function A001 001- 512 DMX512 address code set to 10-channel mode d001 001- 512 DMX512 address code set 6- channel mode Red dimming r255 000 - 255 Green dimming G255 000 - 255 Blue dimming b255 000 - 255 White dimming...
Page 4 A:Function B:Up C:Down D:Enter E:LED Display Instructions:Press the function key A cycled out the eight different function effects,digital tube first two digits on behalf of which the current function(see menu).The last two digits represent the functions in which the address code or speed parameters.Press the B or C key to modify the parameter values.Press the D key to confirm.