Devolo MicroLink dLAN ADSL Modem User Manual page 36

36
Router configuration
PPP Disconnect Timeout
Use 'PPP Disconnect Timeout' to define filters for the idle time. These filters
can be used to accept or discard certain data packets.
The idle time function (default setting: '5') lets you set a time limit so that you
can control your connection charges and reduce costs based on time. If the
router does not receive any admitted data packets for the amount of time spe-
cified by the idle time setting, it automatically disconnects from the Internet
server. As soon as it receives a request to connect after disconnecting auto-
|
devolo MicroLink dLAN ADSL Modem Router
|
'Gateway': 'IP Address' of the next router over which the destination
network can be reached.
'Interface' is the interface over which the target network can be rea-
ched.
|