Devolo MicroLink dLAN ADSL Modem User Manual page 21

Please note that changing the administrator password will disable the setup
wizard. To use the setup wizard, restore the password to its default setting,
'password'.
LAN
Define the settings for the local network under 'LAN'.
b
'IP Address': By default the MicroLink dLAN ADSL Modem Router has the
IP address '192.168.0.253'. This address can be changed as required for
your local network.
Please note that changing the IP address will disable the setup wizard. The
setup wizard can only be used if the MicroLink dLAN ADSL Modem Router
can be reached at its default IP address of '192.186.0.253' with the subnet
mask '255.255.255.0'.
b
'Subnet Mask': The subnet mask is assigned with the IP address and spe-
cifies the address range. By default, the MicroLink dLAN ADSL Modem
Router has the subnet mask '255.255.255.0'. This address can be chan-
ged as required for your local network.
b
'DHCP Server': Select 'Enabled' to enable the DHCP server and assign IP
addresses dynamically; select 'Disabled' to disable the DHCP server and
assign static IP and gateway addresses manually.
|
Router configuration
|
devolo MicroLink dLAN ADSL Modem Router
21
|