Bosch EXTEGRA IP 9000 FX Installation Manual page 20

en | Install the Optional Media Storage Card
20
Notice!
Take care not to drop the end caps to prevent damage to the cap threads.
4. Remove the inner mounting bracket assembly from the front of the housing:
Note: Before removing the assembly from the housing, ensure that all connections to the User
Interface Board have been removed.
–
Figure 5.2: Loosen the 2 bolts
–
Figure 5.3: Pull the assembly out of the housing
5. Orient the card so that the side with the golden contacts faces away from the camera and
towards the housing as you hold the card in front of the card slot.
6. Slide the card into the card slot. Press the card until you hear a click and the card locks into
place.
2016.02 | 1.2 | F.01U.319.357
Using the multi-use tool, loosen the two (2) bolts that hold the assembly.
Pull the assembly out of the housing until the card slot is accessible.
Installation Manual / Guide d'installation
EXTEGRA IP 9000 FX
Bosch Security Systems