J.Burrows Matrix JBMATEL12K User's Manual And Troubleshooting Manual page 2

 Beep（
 Collision Force（
To navigate through the setup menu use the below buttons：
Backspace key (back to previous menu) or Exit Setup Menu
Tab switch
Enter key (enter to next menu or confirm the current operation)
If there is no numeric key pressed within 20 seconds the Setup Menu will be exited.
Main menu interface
Unit
Brightness
Beep
Collision Force
）: Turn on/off beep sound;
）: Collision protection sensitivity;
Submenu
interface
Select height unit to be displayed in cm or
SI Metric
inches.
Inch
to confirm and save it. The system will exit after
2 seconds.
Select brightness setting of controller. Use
Low
Normal
to confirm and save it. The system will exit after
High
2 seconds.
Turn on or off the beep sound. Use
Off
choose sound on or off, and press
confirm and save it. The system will exit after 2
On
seconds.
Off
Select collision protection sensitivity. Use
Light
confirm and save it. The system will exit after 2
Normal
seconds.
Heavy
2/3
Description
or to choose the height unit, and press
to choose the brightness level, and press
to choose the sensitivity, and press
or
or to
to
or
to