Warranty; Warranty Policy; Limited Responsibility And Warranty; International Warranty Clause - Technimount System PRO 121-GR1 Series User Manual

WARRANTY POLICY

This statement constitutes TECHNIMOUNT's entire warranty policy with regards to the TECHNIMOUNT Products.
TECHNIMOUNT MAKES NO OTHER WARRANTY OR REPRESENTATION NEITHER EXPRESSED NOR IMPLIED, EXCEPT AS
SET FORTH HEREIN. THERE IS NO WARRANTY OF MERCHANTABILITY AND THERE ARE NO WARRANTIES OF FITNESS
FOR ANY PARTICULAR PURPOSE. IN NO EVENT SHALL TECHNIMOUNT BE LIABLE HEREUNDER FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING FROM OR IN ANY MANNER RELATED TO SALES OR USE OF ANY SUCH EQUIPMENT.
TECHNIMOUNT E.M.S. Holding Inc. (TECHNIMOUNT) guarantees to the original "Purchaser" of the "Hardware" with
which this "Limited Warranty" is included that the Hardware will be free from "Defects" in workmanship and materials
under normal use for a "Warranty Period", one (1) year from the date that the Hardware was first purchased by
the Purchaser. During the Warranty Period, the Hardware will be repaired or replaced according to the "Limited
Warranty" without charge to the Purchaser for either parts or labor. The parts may be repaired or replaced with either
new or refurbished parts. The product may be replaced for a new or refurbished product. For this Limited Warranty
"refurbished" means parts and products, which have been returned to factory specifications. If the Hardware is
repaired or replaced within the Warranty Period, the greater of the remaining warranty period will apply or three (3)
months from the date of repair/replacement. If the Hardware is repaired or replaced after the Warranty Period has
expired, the Warranty Period for the repair or replacement will expire three (3) months after the date of repair or
replacement.

LIMITED RESPONSIBILITY AND WARRANTY

The Limited Warranty does not apply to normal wear that should result from normal use. It does not apply when the
Hardware or any component is opened, disassembled, or repaired by someone not authorized by TECHNIMOUNT and
does not cover repair or replacement of any Hardware or part thereof damaged by neglect, misuse, moisture, liquids,
exposure to heat, accidents, abuse, and non- compliance with the instructions for installation and use provided with
the Hardware. The Limited Warranty does not cover physical damage to the surface of the Hardware, and the decision
to repair, replace or refuse the coverage is final and its sole discretion of TECHNIMOUNT, and is made without any
compensation or obligation from TECHNIMOUNT.
The hardware, or product defined as a mounting or bracket system for clipping and attaching medical equipment is
specifically designed to fill this requirement. Any other use will void the warranty and TECHNIMOUNT will not be held
liable on any claim if the product is modified or adapted for use.
Technimount products are intended to retain a medical device in place in the case of a single crash impact. A
Technimount product must NOT be used again if it was involved in a crash. The product MUST be replaced. If the
Purchaser uses a Technimount product following a crash, it is at the Purchaser's own risk and Technimount will not be
held liable.

INTERNATIONAL WARRANTY CLAUSE

This warranty reflects Canadian domestic policy. Warranty outside Canada may vary by country. Please contact
TECHNIMOUNT Customer Service for more information.
Return to Table of Content
26

WARRANTY

BP121-GR1 UG 202108-01 www.technimount.com