Technimount System PRO 121-GR1 Series User Manual page 13

SUMMARY OF SAFETY PRECAUTIONS
WARNING/CAUTION/NOTE (CONTINUED)
CAUTION
9 Only certified technical personnel familiar with the bracket installation and use should manipulate it. Always refer
to Technimount's user guides for all instructions for installing and using any Technimount Mounting System.
9 Inspect regularly all components on the equipment for any issue and loose screws, bolts and nuts.
9 Never install the mount into or on other similar mounting systems or brackets without written confirmation by
Technimount System as these different systems may be from other brands or models and may not be compatible
with Technimount System.
NOTE
9 Some cleaning products are corrosive in nature and may cause damage to the product if used improperly. If such
products are used to clean Technimount equipment, the equipment must be rinsed with clean water and thoroughly
dried following the cleaning. Failure to properly rinse and dry the Mounting Systems will leave a corrosive residue
on the surface, possibly causing premature corrosion of critical components.
9 When ordering, it is important to identify on which mounting system you need to mount the bracket on as there
are different systems for different applications (ground).
9 A maintenance program should be established for all Technimount equipment. Preventive maintenance may need
to be performed more frequently, based on the level of use of the product. Close attention should be given to
safety features (i.e.: screws, quick release mechanisms, and attachment points).
9 Failure to use authorized parts, and lubricants, could cause damage to the equipment and will void the warranty
of the product.
9 This user guide should be considered a permanent part of the bracket, and should remain with the product even if
the equipment is subsequently sold.
9 Technimount continually seeks advancements in product design and quality. Therefore, while this user guide
contains the most current product information available at the time of printing, there may contain minor differences
between your mounting system and this user guide.
If you have any questions, or for more information, please contact Technimount Customer Service
technimount.com.
www.technimount.com BP121-GR1 UG 202108-01
customerservice@
Return to Table of Content
13