H Ow To Ch A Rg E Th E B At Tery - EMG Bomber Instruction Manual

H OW TO R EC HA RG E THE
BAT TE RY
In a ventilated area, insert
the charger connector into
the corresponding battery
charging connector, then
the charger into a stan-
dard current plug a 230V ~
50Hz.
Do not recharge the bat-
tery in closed and poorly
ventilated places!
Verify that the charger
connector and plug are not
damaged.
During charging, the char-
ger indicator is red; when the battery is full, the indicator turns green.
The time needed for a full charge is approximately 6 hours. This may
vary considering the residual charge.
After charging is completed, pull out the charger plug from the socket,
then disconnect the charger connector from the bicycle charging hole.
Do not leave the charger connected to the socket for a long time after
charging has been completed.
If a smell comes out from the charger during charging, the temperature
may have become too high; please stop charging immediately and send
the unit for maintenance.
Use only the charger supplied with the bicycle to avoid damage to the
battery and not to void the warranty.
WA RN I N G
lithium battery, do not replace with incorrect bat-
tery type, danger of explosion.
16