Control Panel - Euromaid ETL550FCW User Manual

OPERATION

Control Panel

WATER LEVEL
Select water level according to
amount of clothes loaded into the
machine where 1 is low and 8 is
high.
A solid indicator light indicates
the water level to the left (1, 3, 5,
7) and a flashing indicator light
indicates the water levels to the
right (2, 4, 6, 8).
DELAY
After selecting a Program, press the
Delay button to choose a delayed
start time. Press Start/Pause to
commence the delay operation.
To switch the delay start off, simply
press the button until the delay light
is off. If the program has already
started, press the Power button to
reset the program.
PG 16
DISPLAY
The display shows the settings, estimated time
remaining, options, and status messages for the
washing machine. The display will remain on
through the cycle.
If using the delay function, the LED will be
flashing with the remaining time before the
machine starts washing. During a washing
cycle, the LED is will be solid and show the
remaining time of the program.
NOTE!
• If there is any break in the power supply while
the machine is operating, the current program
selected will be stored in the memory and will
resume when the power supply is reconnected.
FUNCTION
Press this button to select desired wash
functions. i.e. Soak, Wash, Rinse or Spin
or a combination of these.
USER MANUAL
WATER TEMPERATURE
Press this button to select the water
temperature. When both the Hot
and Cold indicators are lit, the water
temperature is set to Warm.
RINSE
Press this button to select
the desired number of
rinses.
PROGRAM
CHILD LOCK
Press this button to select the
desired wash program.
Simultaneously press the RINSE TYPE
A solid LED indicates the
and PROG. buttons to activate the
program on the left (Mixed,
child lock. Repeat this process to
Whites, Sport, Rapid) is selected
deactivate the child lock.
whereas a flashing LED indicates
the program on the right (Daily,
NOTE!
Delicate, Intense) is selected.
• The Child Lock function will
lock all buttons except POWER.
PG 17
POWER
Press this button to turn
the washing machine
On or Off.
DRUM CLEAN
Drum clean aids in keeping the machine
clean by pushing out dirt and grime
START/PAUSE
lodged in the drum.
A flashing LED indicates the cleaning
function will be performed during the
After selecting the desired wash
program.
settings, press this button to start
the wash cycle.
NOTE:
You can also use this button to
The function is included in the Mixed,
pause the washing machine
Whites, Sport and Intense programs.
during operation.
START
-
PAUSE
FAST+
Fast+ is engaged by
Simultaneously pressing the
PROG. and TEMP. buttons.
Repeat this process to
deactivate.
Fast+ will reduce the washing
cycle time by 20-40% by
increasing the intensity of the
agitator.
USER MANUAL