Haier HWM140-1826T Owner's Manual page 33

Installation & Adjustment
Connection between the jointer of the water inlet hose
and the water inlet hose
1.Push down the slider. Insert the water inlet hose
into the jointer.
2.Hang the lock lever to the jointer. Release the
slider till a click sound is heard.
Check the connection between the jointer of the water inlet hose and the
water faucet
1.Swing the hose gently to confirm if it
is fastened stable.
2.After installation, open the faucet to
check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if
the connection between the jointer of the water inlet hose and the water
faucet, and the installation of the water inlet hose are firm, so as to prevent
dropping from improper installation position.
Dismantle the water inlet hose
1.Close the water faucet.
2.Press the locking lever. Push down the slider.Then
pull off the water inlet hose.If the machine is used
frequently, the jointer of the water inlet hosevhose.
If the machine is used frequently, the jointer of the
water inlet hose
Locking lever
8
the jointer of the
water inlet hose
Slider
Locking lever
Slider