Place The Mower Upright In Vertical Position; Unfold The Lower Handle; Install The Grass Catcher - GreenWorks MO48L4213 Operator's Manual

7.2 PLACE THE MOWER UPRIGHT IN
VERTICAL POSITION
15
14
G

1. Place the mower upright in vertical position.

2. Remove the packing material from the cable.
3. Remove the rubber edge guard (G) from the upper
handle.
4. Insert the upper handle into the lower handle.
5. Put the bolts (15) through the holes and tighten with the
nuts (14), using a Philips head screwdriver (not included).
WARNING
Do not damage the cable while installing the upper handle.
English
7.3
14
15
G
1. Pull up on the handle holes (4) to release the lower
2. Fold the lower handle up until the handle pins (16) lock
Make sure that the two handle pins are in the same position.
7.4
1. Remove the mulch plug.
2. Remove the side discharge chute.
3. Open the rear discharge door (6) and hold it.
9

UNFOLD THE LOWER HANDLE

16
handles (5).
into position.
NOTE

INSTALL THE GRASS CATCHER

6
18
19
EN
4
5