Blaupunkt 5CR2 Series User Manual page 46

en Troubleshooting
Troubleshooting
14 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The appliance is not
cooling, the displays
and lighting light up.
The LED lighting does
not work.
The base of the refri-
gerator compartment
is wet.
or appears in the
temperature display.
46
Cause and troubleshooting
Showroom mode is switched on.
Carry out the appliance self-test. → Page 48
▶
Once the appliance self-test has ended, the appli-
a
ance switches to normal operation.
Different causes are possible.
Call customer service.
▶
The customer service number can be found in the
enclosed customer service directory.
The condensation channel or drainage hole are
blocked.
Clean the condensation channel and the drainage
▶
hole. → Page 45
The electronics have detected a fault.
Switch off the appliance. → Page 39
1.
Disconnect the appliance from the mains.
2.
Unplug the appliance from the mains or switch off
the circuit breaker in the fuse box.
Reconnect the appliance after five minutes.
3.
If the message still appears on the display, call cus-
4.
tomer service.
The customer service number can be found in the
enclosed customer service directory.