Using Your Remote Starter - Voxx Electronics PRESTIGE APSSECRS Owner's Manual

Using Your Remote Starter

Remote Starting Your Vehicle
To activate the remote start function, use the button sequence
checked below. The system will sound, the parking lights will flash
1 time and the system will check the vehicle to ensure it is safe to
start. If all safety parameters are correct, the vehicle will start. The
vehicle's parking lights will turn on (or flash depending on system
settings) as a visual indication that the vehicle has started and is
running.
If your vehicle stalls or does not start, the system will pause 5
seconds, then try 3 more times to start the vehicle (a total of 4
attempts). The system will pause 5 seconds between each start
attempt.
Lock, Lock, Lock
Lock, Unlock, Lock
Remote Start Shutdown
Use the button sequence checked above.
Entering the Vehicle while it is Running via Remote Vehicle
Start (Optional)
1. Unlock the vehicle's doors.
2. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL!
3. Insert the key into the ignition switch and turn to the ON or
RUN position.
4. Press the brake pedal.
The remote vehicle starter will disengage and the vehicle will
operate normally.
Preheating or Precooling the Vehicle's interior
Before exiting the vehicle, set the temperature controls to the
desired setting and operation. After the system starts the vehicle,
the heater or air conditioner will activate and heat or cool the
vehicle's interior to your setting.
4 APSSECRS Owners REV. B