Getting Started - Pro Fitness T3000 Assembly & User Instructions

Exercise Information

Getting Started

85 86
Plug your fitness equipment into the mains power and turn on the switch (85).
You will hear a beep and the computer screen will light up.
OVER-CURRENT PROTECTOR:
There is an over-current protector (86) located on the right side of the switch (85) (see above picture); in
case of short circuit or over-current, the Button of the over current protector will pop up and the treadmill
will power off; please unplug the power source and push down the button. Plug the machine back in and
then turn on the switch to restart your treadmill. If the button pops up again, please contact the Customer
0345 600 1714.
Helpline
15