Performing A Self Test - Miele KF 2982 SF Operating And Installation Instructions

Performing a Self Test 
Perform a Self Test
that your refrigeration appliance is not
working properly and want to check if it
is suffering from any problems.
 In Settings mode , use the  and
 sensor controls to select
and select OK to confirm your selec-
tion.
 Touch the  sensor control if you
wish to terminate the process.
The starts and the appliance is
Self Test
checked for any faults or malfunctions.
- The message
System restart
pear on the display if the Self Test
does not discover any faults or mal-
functions.
- If the Self Test does discover any
faults or malfunctions, they are indi-
cated as error messages on the dis-
play.
An alarm will also sound.
 If you find the alarm disruptive, you
can switch it off in advance by touch-
ing the  sensor control.
 Make a note of the error message(s)
displayed.
 Contact Miele Service and inform
them of the error message(s) on the
display.
 Confirm the message with OK.
will appear on the display.
System restart
The refrigeration appliance briefly
switches off and then back on automat-
ically.
if you are concerned
Self Test
will ap-
Selecting additional settings
Self test completed
play.
 Confirm the message with OK.
The main screen appears on the display
again.
will appear on the dis-
61