Table of Contents
Advertisement
Connecting your refrigeration appli-
ance via WPS
Your router must be equipped with the
WPS function for this connection op-
tion.
In Settings mode , use the and
sensor controls to select
Miele@home
and select OK to confirm
your selection.
Set up
will appear on the display.
Confirm your selection with OK.
Use the and sensor controls to
select
via WPS
firm your selection.
Now follow the instructions on the
display.
Confirm the process with OK.
To be able to use the Miele@home
functions, you also have to register
your refrigeration appliance in the app.
As soon as your refrigeration appli-
ance has been integrated into your
home network via WPS, the message
Connection successful
the display.
Confirm the process with OK again.
If the WLAN connection is active, will
appear on the display.
and select OK to con-
will appear on
Selecting additional settings
Deactivating Miele@home
In Settings mode , use the and
sensor controls to select
Miele@home
your selection.
Use the and sensor controls to
select
Deactivate
confirm your selection.
Deactivation successful
display.
Confirm the message with OK.
Your refrigeration appliance is now dis-
connected from your WLAN network.
The symbol will go out on the dis-
play.
Activating Miele@home
If you have already activated
Miele@home and then disconnected
the connection, you will need to reac-
tivate the connection.
In Settings mode , use the and
sensor controls to select
Miele@home
your selection.
Use the and sensor controls to
select
Activate
firm your selection.
Activation successful
display.
Confirm the message with OK.
If the WLAN connection is active, will
appear on the display.
and select OK to confirm
and select OK to
will appear on the
and select OK to confirm
and select OK to con-
will appear on the
67
Advertisement
Table of Contents
